Arkema · Grade
Pebax 2533 SD 02
Polyether Block Amide
PEBAX®2533 SD 02 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SD grade is heat & UV stabilized and contains mold release additive.
Manufacturer
Arkema
Status
active
Technical properties
| Shrinkage, parallel (t+24h) | 0.6 % |
| Shrinkage, normal (t+24h) | 0.7 % |
| Flexural modulus,23℃(73℉) | 12 MPa |
| Tensile modulus,23℃(73℉) | 12/10 MPa |
| Stress at 50% strain,23℃(73℉) | 3 MPa |
| Stress at break,23℃(73℉) | 32 MPa |
| Nominal strain at break,23℃(73℉) | >750 % |
| Hardness,shore A,15s | 74 |
| Hardness,shore D,15s | 22 |
| Compression set | 19 % |
| Abrasion resistance | 130 mm³ |
| Glass transition temperature,10℃/min | -65 ℃ |
| Heat deflection temperature,0.45MPa | 42 ℃ |
| Melting temperature,10℃/min | 134 ℃ |
| Surface resistivity,23℃(73,4℉) | 1E+13 ohm/sq |
| Volumic(transversal) resistivity,23℃(73,4℉) | 3E+09 ohm.m |
| Comparative tracking index,23℃(73,4℉) | 600 |
| Relative permittivity,100Hz | 6 |
| Relative permittivity,1Mhz | 6 |
| Dissipation factor,100Hz | 552 E-4 |
| Dissipation factor,1Mhz | 378 E-4 |
| Dielectric Strength,23℃(73,4℉) | 36 kV/mm |
| Water absorption, at equilibrium at 23℃(73℉)/50%RH | 0.4 % |
| Density，23℃(73℉) | 1 g/cm3 |
| Water absorption, at equilibrium at 23℃(73℉)/Immersion | 1.2 % |
Indicative values. Always consult the manufacturer's official datasheet before specification.
Pebax 2533 SD 02 equivalents
No verified equivalents indexed yet.
Typical applications
sport and consumer applications
Manufacturer
Arkema
Browse all indexed grades