Arkema · Grade
RILSAN BESNO TL
PA11
RILSAN® BESNO TL is a polyamide 11 compound produced from a renewable and sustainable source (castor oil), designed for tube extrusion.
Manufacturer
Arkema
Status
active
Technical properties
| Melt volume flow rate | 1 cm³/10min |
| Flexural modulus | 1085 MPa |
| Tensile modulus | 1280 MPa |
| Yield stress | 38 MPa |
| Yield strain | 5 % |
| Nominal strain at break | >50 % |
| Charpy unnotched impact strength (23℃) | No break |
| Charpy unnotched impact strength (-30℃) | No break |
| Charpy notched impact strength (23℃) | 11 kJ/m2 |
| Charpy notched impact strength (-30℃) | 12 kJ/m2 |
| Hardness, shore D | 72 |
| Stress at break | 57 MPa |
| Vicat softening temperature | 160 ℃ |
| Heat deflection temperature (0.45MPa) | 145 ℃ |
| Heat deflection temperature (1.8MPa) | 50 ℃ |
| Melting temperature | 186 ℃ |
| Surface resistivity | 1.0E+14 ohm/sq |
| Volumic (transversal) resistivity | 1.0E+12 ohm.m |
| Relative permittivity (100Hz) | 3 |
| Relative permittivity (1Mhz) | 3 |
| Dissipation factor (100Hz) | 308 E-4 |
| Dissipation factor (1Mhz) | 183 E-4 |
| Comparative tracking index | 600 |
| Dielectric Strength | 30 kV/mm |
| Bio-based carbon content | 99 % |
| Density | 1.02 g/cm3 |
| Water absorption (at equilibrium) | 1.9 % |
Indicative values. Always consult the manufacturer's official datasheet before specification.
RILSAN BESNO TL equivalents
No verified equivalents indexed yet.
Manufacturer
Arkema
Browse all indexed grades