BUNATEX · ABS
BUNATEX® 8802/0
ABS
Manufacturer
BUNATEX
Base polymer
ABS
Trade family
BUNATEX®
Status
active
Technical properties
| Density | 1.04 g/cm3 |
| Tensile Strength, Ultimate | 45.0 MPa |
| Elongation at Break | 25 % |
| Modulus of Elasticity | 2.35 GPa |
| Notched Izod Impact | 250 J/m |
| Hardness, Rockwell R | 100 |
| Heat Deflection Temperature @ 0.45 MPa (65 psi) | 95.0 °C |
| Heat Deflection Temperature @ 1.8 MPa (264 psi) | 84.0 °C |
| Vicat Softening Point | 100 °C |
| Melting Temperature | 230 °C |
| Mold Shrinkage, Flow | 0.40 % |
| Water Absorption, 24 hrs | 0.20 % |
Indicative values. Always consult the manufacturer's official datasheet before specification.
BUNATEX® 8802/0 equivalents
No verified equivalents indexed yet.
Typical applications
AppliancesAutomotive InteriorElectrical/Electronic ApplicationsGeneral PurposeIndustrial Applications
Base polymer
ABS
See the full ABS technical sheet
Manufacturer
BUNATEX
Browse all indexed grades