DuPont · POM (Delrin)
Delrin 100AL
Unreinforced, high vicosity, lubricated
Delrin 100AL NC010 is an unreinforced, high viscosity, lubricated acetal homopolymer resin, containing an advanced system of lubrication for low wear and friction against metals and plastics.
Manufacturer
DuPont
Base polymer
POM (Delrin)
Status
active
Technical properties
| Yield Stress | 70 MPa |
| Yield Strain | 18 % |
| Nominal Strain at Break | 45 % |
| Tensile Modulus | 3000 MPa |
| Flexural Modulus | 2800 MPa |
| Notched Charpy Impact Strength, -30℃ | 7 kJ/m2 |
| Notched Charpy Impact Strength, 23℃ | 9 kJ/m2 |
| Unnotched Charpy Impact Strength, -30℃ | 170 kJ/m2 |
| Unnotched Charpy Impact Strength, 23℃ | 250 kJ/m2 |
| Deflection Temperature 0.45 MPa | 163 ℃ |
| Deflection Temperature 1.80 MPa | 97 ℃ |
| Melting Temperature | 178 ℃ |
| Melt Mass-Flow Rate, 190℃, 2.16kg | 2.5 g/10min |
| Density | 1400 kg/m^3 (1.40 g/cm^3) |
| Molding Shrinkage, Parallel, 2.0mm | 1.8-2.0 % |
Indicative values. Always consult the manufacturer's official datasheet before specification.
Delrin 100AL equivalents
No verified equivalents indexed yet.
Base polymer
POM (Delrin)
See the full POM technical sheet
Manufacturer
DuPont
Browse all indexed grades