Envalior · Grade
Durethan® BTC67ZH3.0EF
PA6-MX67
Manufacturer
Envalior
Trade family
Durethan®
Status
active
Technical properties
| Molding shrinkage, parallel | 0.9 % |
| Molding shrinkage, normal | 0.7 % |
| Tensile modulus | 8800 MPa |
| Stress at break | 90 MPa |
| Strain at break | 3.5 % |
| Charpy impact strength, +23°C | 70 kJ/m² |
| Charpy impact strength, -30°C | 50 kJ/m² |
| Melting temperature, 10°C/min | 222 °C |
| Temperature of deflection under load, 1.80 MPa | 120 °C |
| Temperature of deflection under load, 0.45 MPa | 189 °C |
| Coefficient of linear thermal expansion, parallel | 50 E-6/K |
| Coefficient of linear thermal expansion, normal | 50 E-6/K |
| Volume resistivity | >1E13 Ohm*m |
| Electric strength | 33 kV/mm |
| Comparative tracking index | 600 |
| Density | 2170 kg/m³ |
| Injection molding, melt temperature | 290 °C |
| Injection molding, mold temperature | 80 °C |
Indicative values. Always consult the manufacturer's official datasheet before specification.
Durethan® BTC67ZH3.0EF equivalents
No verified equivalents indexed yet.
Typical applications
Injection molding
Manufacturer
Envalior
Browse all indexed grades