INEOS Styrolution · ABS
Luran® S 797SE Q440
ASA
Manufacturer
INEOS Styrolution
Base polymer
ABS
Trade family
Luran® S
Status
active
Technical properties
| Melt volume-flow rate, MVR | 5 cm³/10min |
| MVR Temperature | 220 °C |
| MVR Load | 10 kg |
| Tensile modulus | 1900 MPa |
| Yield stress | 41 MPa |
| Yield strain | 3.5 % |
| Nominal strain at break | 8.6 % |
| Charpy impact strength, +23°C | 210 kJ/m² |
| Charpy notched impact strength, +23°C | 20 kJ/m² |
| Charpy notched impact strength, -30°C | 5 kJ/m² |
| Temperature of deflection under load, 1.80 MPa | 96 °C |
| Temperature of deflection under load, 0.45 MPa | 101 °C |
| Vicat softening temperature, 50°C/h 50N | 92 °C |
| Humidity absorption | 0.4 % |
| Density | 1070 kg/m³ |
| Density of melt | 967 kg/m³ |
| Thermal conductivity of melt | 0.204 W/(m K) |
| Spec. heat capacity of melt | 2830 J/(kg K) |
Indicative values. Always consult the manufacturer's official datasheet before specification.
Luran® S 797SE Q440 equivalents
No verified equivalents indexed yet.
Typical applications
Profile extrusionSheet extrusionOther extrusion
Base polymer
ABS
See the full ABS technical sheet
Manufacturer
INEOS Styrolution
Browse all indexed grades