15Plastics105Db
INEOS Styrolution · ABS

Terluran GP-22

general purpose injection molding grade

Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.

Manufacturer
INEOS Styrolution
Base polymer
ABS
Status
active

Technical properties

Melt volume-flow rate, MVR19 cm3/10min
Tensile Modulus2300 MPa
Yield stress45 MPa
Yield strain2.6 %
Nominal strain at break10 %
Impact Strength(Charpy),+23℃180 kJ/m2
Impact Strength(Charpy),-30℃100 kJ/m2
Notched Impact Strength(Charpy),+23℃22 kJ/m2
Notched Impact Strength(Charpy),-30℃8 kJ/m2
HDT (1.80MPa)94 °C
HDT (0.45MPa)99 °C
Vicat softening temperature,50℃/h50N96 °C
Relative permittivity,100Hz2.9
Relative permittivity,1MHz2.8
Dissipation Factor,100Hz48 E-4
Dissipation Factor,1MHz79 E-4
Volume Resistivity>1E13 Ohm*m
Surface Resistivity1E13 Ohm
Water Absorption1 %
Humidity absorption0.22 %
Density1040 kg/m3

Indicative values. Always consult the manufacturer's official datasheet before specification.

Terluran GP-22 equivalents

No verified equivalents indexed yet.

Base polymer
ABS
See the full ABS technical sheet
Manufacturer
INEOS Styrolution
Browse all indexed grades