15Plastics105Db
Mitsubishi Chemical Advanced Materials · Grade

Ertalyte® TX PET-P

Polyethylene Terephthalate + PA 6

Manufacturer
Mitsubishi Chemical Advanced Materials
Trade family
Ertalyte® TX
Status
active

Technical properties

Material StatusCommercial: Active
AvailabilityAfrica & Middle East, Asia Pacific, Europe, Latin America, North America
FeaturesExcellent Wear Resistance, Good Chemical Resistance, Good Dimensional Stability, High Rigidity, High Strength, Low Coefficient of Friction, Low Moisture Absorption, Stain Resistant
AppearanceNatural
Density / Specific Gravity1.41 g/cm³
Density1.41 g/cm³
Water Absorption @ 24 hrs0.060 %
Water Absorption 24h/23C0.060 %
Water Absorption @ Sat.0.19 %
Water Absorption Sat/23C0.19 %
Tensile Modulus4000 MPa
Tensile Strength86 MPa
Tensile Elongation at Yield1.5 %
Tensile Elongation at Break9.0 %
Flexural Modulus4000 MPa
Flexural Strength130 MPa
Compressive Strength120 MPa
Shear Strength65 MPa
Coefficient of Friction0.20
Wear Factor90E-10 mm³/N-m
Charpy Notched Impact Strength10 kJ/m²
Charpy Unnotched Impact Strength110 kJ/m²
Notched Izod Impact9.0 J/m
Rockwell HardnessM90
Shore HardnessD82
DTUL (264 psi) - Unannealed85 °C
Peak Melting Temperature220 °C
Coefficient of Linear Thermal Expansion, Flow1.0E-5 cm/cm/°C
Thermal Conductivity0.26 W/m/K
Surface Resistivity1.0E14 ohms
Volume Resistivity1.0E13 ohm-cm
Dielectric Strength20 kV/mm
Dielectric Constant3.3 @1kHz
Dissipation Factor0.0020 @1kHz
Flame RatingHB
Oxygen Index21 %

Indicative values. Always consult the manufacturer's official datasheet before specification.

Ertalyte® TX PET-P equivalents

No verified equivalents indexed yet.

Typical applications

High Pressure ApplicationsHigh Velocity ApplicationsSoft Metal Mating SurfacesPlastic Mating Surfaces
Manufacturer
Mitsubishi Chemical Advanced Materials
Browse all indexed grades