Quadrant EPP · Grade
Ertalon® 6 SA
Nylon 6 (PA6)
Manufacturer
Quadrant EPP
Trade family
Ertalon
Status
active
Technical properties
| Density | 1.14 g/cm3 |
| Water Absorption, 24 hrs | 0.15 % |
| Water Absorption at Sat. (23C) | 7.5 % |
| Tensile Strength, ultimate | 80 MPa |
| Tensile Strength, yield | 60 MPa |
| Elongation at break | 50 % |
| Tensile Modulus | 3200 MPa |
| Flexural Modulus | 3000 MPa |
| Flexural Strength, yield | 80 MPa |
| Compressive Strength | 90 MPa |
| Compressive Modulus | 2800 MPa |
| Shear Strength | 55 MPa |
| Hardness, Rockwell R | 110 |
| Hardness, Shore D | 80 |
| DTUL @ 0.45 MPa (65 psi) | 150 °C |
| DTUL @ 1.8 MPa (264 psi) | 70 °C |
| Melting Point | 220 °C |
| Volumetric CTE, amorphous | 210 µm/m-°C |
| Thermal Conductivity | 0.23 W/m-K |
| Specific Heat Capacity | 1.7 J/g-°C |
| Dielectric Strength | 20 kV/mm |
| Dielectric Constant | 3.7 @1MHz |
| Dissipation Factor | 0.05 @1MHz |
| Volume Resistivity | 1.00e+14 ohm-cm |
Indicative values. Always consult the manufacturer's official datasheet before specification.
Ertalon® 6 SA equivalents
No verified equivalents indexed yet.
Typical applications
BearingsGearsRollersWear padsValvesMachinery parts
Manufacturer
Quadrant EPP
Browse all indexed grades