SABIC · Grade
ULTEM™ Resin 1000
PEI
Manufacturer
SABIC
Trade family
ULTEM™
Status
active
Technical properties
| Melt volume-flow rate, MVR | 13 cm³/10min |
| MVR_Temperature | 360 °C |
| MVR_Load | 5 kg |
| Charpy notched impact strength, +23°C | 4 kJ/m² |
| Charpy notched impact strength, -30°C | 4 kJ/m² |
| Temperature of deflection under load, 1.80 MPa | 192 °C |
| Temperature of deflection under load, 0.45 MPa | 209 °C |
| Vicat softening temperature, 50°C/h 50N | 211 °C |
| Burning behavior at thickness h | V-2 class |
| Burning behavior_Thickness tested | 0.4 mm |
| Burning behavior 5V at thickness h | 5VA class |
| Burning behavior 5V_Thickness tested | 3 mm |
| Relative permittivity, 1MHz | 2.9 |
| Dissipation factor, 1MHz | 60 E-4 |
| Volume resistivity | 1E11 Ohm*m |
| Surface resistivity | 1E15 Ohm |
| Electric strength | 33 kV/mm |
| Comparative tracking index | 150 |
| Water absorption | 1.25 % |
| Density | 1270 kg/m³ |
Indicative values. Always consult the manufacturer's official datasheet before specification.
ULTEM™ Resin 1000 equivalents
No verified equivalents indexed yet.
Manufacturer
SABIC
Browse all indexed grades