SABIC · Grade
ULTEM™ Resin 2110
PEI-GF10
Manufacturer
SABIC
Trade family
ULTEM™ Resin
Status
active
Technical properties
| Melt volume-flow rate, MVR | 13 cm³/10min |
| Temperature | 360 °C |
| Load | 5 kg |
| Tensile modulus | 4500 MPa |
| Stress at break | 115 MPa |
| Strain at break | 4 % |
| Charpy impact strength, +23°C | 35 kJ/m² |
| Charpy impact strength, -30°C | 35 kJ/m² |
| Vicat softening temperature, 50°C/h 50N | 212 °C |
| Burning behavior at thickness h | V-0 class |
| Thickness tested | 0.25 mm |
| Burning behavior 5V at thickness h | 5VA class |
| Thickness tested (5V) | 1.9 mm |
| Relative permittivity, 1MHz | 2.9 |
| Dissipation factor, 1MHz | 25 E-4 |
| Volume resistivity | 1E11 Ohm*m |
| Surface resistivity | 1E15 Ohm |
| Electric strength | 34 kV/mm |
| Comparative tracking index | 150 |
| Water absorption | 1 % |
| Humidity absorption | 0.6 % |
| Density | 1340 kg/m³ |
Indicative values. Always consult the manufacturer's official datasheet before specification.
ULTEM™ Resin 2110 equivalents
No verified equivalents indexed yet.
Manufacturer
SABIC
Browse all indexed grades