SABIC · Grade
ULTEM™ Resin 2300
PEI-GF30
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C).
Manufacturer
SABIC
Status
active
Technical properties
| Tensile modulus | 9500 MPa |
| Stress at break | 165 MPa |
| Strain at break | 2 % |
| Charpy impact strength, +23°C | 40 kJ/m² |
| Charpy impact strength, -30°C | 40 kJ/m² |
| Vicat softening temperature, 50°C/h 50N | 213 °C |
| Melt volume-flow rate, MVR | 6 cm³/10min |
| Density | 1510 kg/m³ |
| Relative permittivity, 1MHz | 3.4 |
| Dissipation factor, 1MHz | 23 E-4 |
| Volume resistivity | 1E11 Ohm*m |
| Surface resistivity | 1E15 Ohm |
| Electric strength | 35 kV/mm |
| Comparative tracking index | 150 |
| Water absorption | 0.9 % |
| Humidity absorption | 0.5 % |
Indicative values. Always consult the manufacturer's official datasheet before specification.
ULTEM™ Resin 2300 equivalents
No verified equivalents indexed yet.
Manufacturer
SABIC
Browse all indexed grades