Techmer Polymer Modifiers · Grade
HiFill® PET GF20 UV BK
Polyethylene Terephthalate
Manufacturer
Techmer Polymer Modifiers
Trade family
HiFill®
Status
active
Technical properties
| Material Status | Commercial: Active |
| Availability | North America |
| Processing Method | Injection Molding |
| Filler / Reinforcement | 20% Glass Fiber |
| Density / Specific Gravity | 1.47 g/cm³ |
| Water Absorption @ 24 hrs | 0.08 % |
| Tensile Strength at Break | 124 MPa (18000 psi) |
| Tensile Elongation at Break | 1.7 % |
| Flexural Modulus | 8620 MPa (1250000 psi) |
| Flexural Strength | 193 MPa (28000 psi) |
| Notched Izod Impact | 69 J/m (1.3 ft·lb/in) |
| DTUL (66 psi) - Unannealed | 218 °C (424 °F) |
| DTUL (264 psi) - Unannealed | 204 °C (399 °F) |
| Melting Temperature | 252 °C (486 °F) |
| Volume Resistivity | 1.0e+15 ohm-cm |
| Dielectric Strength | 19.7 kV/mm (500 V/mil) |
| Drying Temperature | 121 °C (250 °F) |
Indicative values. Always consult the manufacturer's official datasheet before specification.
HiFill® PET GF20 UV BK equivalents
No verified equivalents indexed yet.
Manufacturer
Techmer Polymer Modifiers
Browse all indexed grades