3D Printing
Dental SLA Resin — Biocompatible Photopolymer Resin for Dental Applications (SLA)
Dental SLA resins are biocompatible materials certified for use in the mouth. They are used to fabricate accurate dental models, surgical guides, night guards, and other dental appliances.
Dental ResinDental SG ResinBio-compatible Resin
Manufacturers
3
Grades
3
Applications
5
Equivalents
0
Physical Properties
- Density
- 1.15-1.25 g/cm³
- Water Absorption (24h)
- 0.2-0.5 %
- Transparency
- Clear to Translucent to Opaque
- Shrinkage
- Low (0.5-1.5%)
Mechanical Properties
- Young's Modulus
- 2.0-3.0 GPa
- Tensile Strength
- 40-55 MPa
- Elongation at Break
- 3-8 %
- Impact Strength (Izod)
- 2-4 kJ/m²
Thermal Properties
- Glass Transition Temperature
- 50-65 °C
- Melting Point
- N/A (cross-linked polymer)
- Continuous Service Temperature
- 45-60 °C
- Heat Deflection Temperature
- 50-60 °C @ 0.45 MPa
Electrical Properties
- Dielectric Constant
- 3.0-3.5
- Volume Resistivity
- 10¹²-10¹⁴ Ω·cm
- Dielectric Strength
- 15-20 MV/m
Chemical Resistance
- Acids
- Fair resistance
- Bases
- Poor resistance
- Solvents
- Resistant to common dental disinfectants. Attacked by strong solvents.
- UV Resistance
- Fair
Sustainability
- Recyclability
- Not Recyclable
- Recycling Code
- N/A
- Carbon Footprint
- High
Manufacturing compatibility
Stereolithography (SLA)Digital Light Processing (DLP)
Applications
Dental Models
Surgical Guides
Night Guards
Indirect Restorations
Check Bites
Available grades
Dental SG ResinBiocompatible ResinModel Resin