Engineering Thermoplastics
PC/PBT Impact Modified — Polycarbonate / Polybutylene Terephthalate Blend, Impact Modified
PC/PBT blends combine the excellent impact strength and heat resistance of PC with the good chemical resistance and lower moisture absorption of PBT. This blend offers enhanced toughness and better resistance to a wider range of chemicals compared to pure PC or ABS blends.
PC/PBTMakroblendCycoloy (can also be PC/ABS)
Manufacturers
2
Grades
2
Applications
4
Equivalents
0
Physical Properties
- Density
- 1.20-1.30 g/cm³
- Water Absorption (24h)
- 0.2-0.4 %
- Transparency
- Opaque
- Shrinkage
- 0.5-1.0 %
Mechanical Properties
- Young's Modulus
- 2.2-3.5 GPa
- Tensile Strength
- 50-65 MPa
- Elongation at Break
- 80-150 %
- Impact Strength (Izod)
- 60-120 kJ/m
Thermal Properties
- Glass Transition Temperature
- 100-120 °C
- Melting Point
- N/A (amorphous/semi-crystalline mix)
- Continuous Service Temperature
- 80-100 °C
- Heat Deflection Temperature
- 80-100 °C (1.8 MPa)
Electrical Properties
- Dielectric Constant
- 2.8-3.3
- Volume Resistivity
- 10^13-10^15 Ohm-cm
- Dielectric Strength
- 18-24 kV/mm
Chemical Resistance
- Acids
- Good
- Bases
- Fair
- Solvents
- Good
- UV Resistance
- Fair
Sustainability
- Recyclability
- Recyclable
- Recycling Code
- 7 (Other)
- Carbon Footprint
- Moderate
Manufacturing compatibility
Injection MoldingExtrusion
Applications
Automotive exterior parts (grilles, body panels)
Housings
Electrical components
Industrial equipment
Available grades
PC/PBT GF20PC/PBT UV Stabilized