Recycled Polymers
PIR/PCR Blend PPA — Post-Industrial and Post-Consumer Recycled Polypropylene Blend
This material is a carefully formulated blend of post-industrial and post-consumer recycled polypropylene. It aims to balance cost with performance, offering properties suitable for a wide range of non-critical injection molded and extruded parts.
rPP BlendEcoBlend PPReCycle Blend
Manufacturers
3
Grades
2
Applications
4
Equivalents
0
Physical Properties
- Density
- 0.900-0.915 g/cm³
- Water Absorption (24h)
- 0.02-0.05 %
- Transparency
- Opaque
- Shrinkage
- 1.5-3.0 %
Mechanical Properties
- Young's Modulus
- 1.1-1.5 GPa
- Tensile Strength
- 20-35 MPa
- Elongation at Break
- 10-50 %
- Impact Strength (Izod)
- 15-30 J/m
Thermal Properties
- Glass Transition Temperature
- -5 °C
- Melting Point
- 150-165 °C
- Continuous Service Temperature
- 70-90 °C
- Heat Deflection Temperature
- 50-65 °C (0.45 MPa)
Electrical Properties
- Dielectric Constant
- 2.2-2.3
- Volume Resistivity
- >10^16 Ohm·cm
- Dielectric Strength
- 20-30 kV/mm
Chemical Resistance
- Acids
- Good
- Bases
- Good
- Solvents
- Fair resistance
- UV Resistance
- Poor (requires stabilizers)
Sustainability
- Recyclability
- Recyclable
- Recycling Code
- 5 (PP)
- Carbon Footprint
- Lower than virgin PP
Manufacturing compatibility
Injection MoldingExtrusion
Applications
Pallets
Bulk containers
Garden furniture
Automotive undertray components
Available grades
PIR/PCR PP Blend 30%EcoBlend PP Gray