3D Printing
Standard SLA Resin — Standard Photopolymer Resin for SLA
Standard SLA resins are formulated for general-purpose 3D printing applications. They offer a good balance of printability, mechanical properties, and surface finish, making them ideal for creating detailed prototypes, concept models, and visual aids.
SLA ResinStandard ResinGeneral Purpose Resin
Manufacturers
3
Grades
3
Applications
5
Equivalents
0
Physical Properties
- Density
- 1.10-1.20 g/cm³
- Water Absorption (24h)
- 0.5-1.0 %
- Transparency
- Clear to Translucent
- Shrinkage
- Moderate (1-3%)
Mechanical Properties
- Young's Modulus
- 1.5-2.5 GPa
- Tensile Strength
- 30-45 MPa
- Elongation at Break
- 2-5 %
- Impact Strength (Izod)
- 1-3 kJ/m²
Thermal Properties
- Glass Transition Temperature
- 50-60 °C
- Melting Point
- N/A (cross-linked polymer)
- Continuous Service Temperature
- 40-50 °C
- Heat Deflection Temperature
- 45-55 °C @ 0.45 MPa
Electrical Properties
- Dielectric Constant
- 3.0-3.5
- Volume Resistivity
- 10¹²-10¹⁴ Ω·cm
- Dielectric Strength
- 15-20 MV/m
Chemical Resistance
- Acids
- Fair resistance
- Bases
- Poor resistance
- Solvents
- Attacked by strong solvents.
- UV Resistance
- Poor (can yellow and degrade)
Sustainability
- Recyclability
- Not Recyclable
- Recycling Code
- N/A
- Carbon Footprint
- High
Manufacturing compatibility
Stereolithography (SLA)Digital Light Processing (DLP)
Applications
Prototyping
Concept Models
Visual Aids
Figurines
Templates
Available grades
Standard ResinClear ResinGrey Resin