Elastomers/TPEs
Hot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE — Styrene-Isoprene-Styrene (SIS) Block Copolymer - Hot Melt Adhesive Grade
This SIS formulation provides optimal melt viscosity and adhesive properties for fast-setting hot-melt adhesives used in packaging, bookbinding, and disposable hygiene products.
SISKraton™ DSolprene®
Manufacturers
3
Grades
3
Applications
4
Equivalents
0
Physical Properties
- Density
- 0.91 - 0.93 g/cm³
- Water Absorption (24h)
- 0.1 %
- Transparency
- Opaque
- Shrinkage
- 1.0 - 2.0 %
Mechanical Properties
- Young's Modulus
- 0.001 - 0.008 GPa
- Tensile Strength
- 1 - 4 MPa
- Elongation at Break
- 600 - 900 %
- Impact Strength (Izod)
- Poor
Thermal Properties
- Glass Transition Temperature
- -55 to -50 °C
- Melting Point
- N/A (softening point around 60-80 °C)
- Continuous Service Temperature
- -50 to 70 °C
- Heat Deflection Temperature
- N/A
Electrical Properties
- Dielectric Constant
- 2.5 - 3.0
- Volume Resistivity
- 10^15 - 10^17 Ohm-cm
- Dielectric Strength
- 20 - 30 kV/mm
Chemical Resistance
- Acids
- Good
- Bases
- Good
- Solvents
- Resists water, dilute acids/bases; dissolves in aromatic and chlorinated hydrocarbons
- UV Resistance
- Poor
Sustainability
- Recyclability
- Limited
- Recycling Code
- 7 (Other)
- Carbon Footprint
- Moderate
Manufacturing compatibility
Anionic PolymerizationCompoundingHot Melt Extrusion
Applications
Packaging adhesives
Bookbinding adhesives
Disposable hygiene products
Label adhesives
Available grades
SIS HM-30SIS HM-40SIS HM-50
Manufacturers
Compare Hot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE with…
Hot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs ABSHot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs PolycarbonateHot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs PETGHot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs PA66Hot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs PEEKHot Melt Adhesive Grade Styrene-Isoprene-Styrene TPE vs PLA